I am using my UC320W at home as a voice and data DHCP server. My business uses MyApps Anywhere as a VPN tunnel between remote users and the internal network. When I try to connect with MyApps Anywhere when on my home network (i.e. when the UC320W is the DHCP server) I am not able to connect.
The log file from the MyApps Anywhere after connection is not established looks like this:
[2014.09.10 22:20:05] No Param
[2014.09.10 22:20:05] Reading configuration file
[2014.09.10 22:20:05] Using config file: mactunnel-cin.conf
[2014.09.10 22:20:05] SHA256 digest: 3e482f8e960f98f5db4d619e65849abede1a8f156ec6eaaf624aa3951cefee30
[2014.09.10 22:20:05] RSA Signature verified.
[2014.09.10 22:20:05] X-Session-ID: d8d705a700784d98978fbbf5a22a75493957404c
[2014.09.10 22:20:05] X-Client-Ver: 105.01.15
[2014.09.10 22:20:05] Bind [MyApps]
[2014.09.10 22:20:05] Accepting fd=5
[2014.09.10 22:20:05] Bind [mgmt]
[2014.09.10 22:20:05] Accepting fd=6
[2014.09.10 22:20:05] Configuration applied
[2014.09.10 22:22:09] [MGMT] (402): MyApps Connectivity Interrupted
Any help would be appreciated
Mark Digby
