cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
374
Views
0
Helpful
1
Replies

Unable to access WebSA and Status pages on Unity 4.2

jean.ledoux
Beginner
Beginner

It happens 2 -3 times a day, we have trouble accessing the WebSA page on our Unity 4.2 server. To solve the problem we have to restart IIS. We did not find any pattern to reproduce the problem. Our unity server is running 2003R2 IIS v6.0 We are using Anonymous Authentication with SSL to access Status and WebSA page. Any idears how we can solve this problem?

Best regards Jean

1 Reply 1

mrmccann
Cisco Employee
Cisco Employee

Hi Jean,

You might be encountering this issue CSCsc86904: WS03 Cannot log back in to SA after timeout

Symptom:

Cisco Unity administrators are unable to access the Cisco Unity System Administrator via Internet Explorer.

Conditions:

Seen occasionally with Unity servers that run on Microsoft Windows Server 2003, typically after an SA session has timed out. Seen with Cisco Unity 4.2(1) and Unity 5.0(1).

If you think this might be your problem, you'll want to download the Eng_Specials_for_Cisco_Unity_4_2_1.zip found here:

http://www.cisco.com/cgi-bin/tablebuild.pl/unity-42

Apply the Engineering Special that has the fix for this bug, as detailed in the readme in the .zip.

Good luck.

Mike

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers