Unity 4.2 off-box store

[asandborgh]

I am installing a non-failover configuration with two 7845s, one for off-box store and one for Unity - VM only. I have not been able to locate any specific instructions on how the off-box store should be configured (as far as the mail stores). Should it be loaded like a standard Unity server (but without Unity) or are there specific instructions?

[ranpierce]

The installation guide I believe is tbe same guide, what version are you and I will post a link.

Off box you install everything except the exchange part is only the system tools. When installing Unity you need to point Unity to the correct message store which will not be itself.

This is all in the installtion guide.

rlp

[asandborgh]

version 4.2(1)

Thanks

[ranpierce]

You need the Unity 4.05 installtion doc and the 421 release notes

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cueum2k3nf/5ue2k3nf.html

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/release/notes/cu421rn.html#wp191230

rlp