When running a SCCP test from Unity I receive ErrorCannotEstablishWinscockConnection. I have a Unity7x application integration with a CUCM ver 8.5. The unusual part is that it resolves with one server and not the second. They are both on the same switch.
Here a sample of the log:
Testing Device 1 - Unity100F1-VI1
Device SecurityMode is Non-Secure.
*** Device Test Succeeded with Errors - Registration succeeded with at least 1 CUCM/CCM.
CUCM/CCM Server 1 [10.241.241.192, TCP Port 2000] - Register Test Succeeded.
Resolved IP Address as 10.241.241.192.
*** CUCM/CCM Server 2 [10.241.241.191, TCP Port 2000] - Register Test Failed.
Resolved IP Address as 10.241.241.191.
Failure Reason: ErrorCannotEstablishWinsockConnection
Troubleshooting Tip: Make sure that the CUCM/CCM Server is accessible via the network and is otherwise operating correctly.
Any thoughts?
