Upgrade CUCM 8.6 to 11.5 using new hardware

[bsingh@asmgi.com]

All, I'm planning to upgrade CUCM 8.6 to 11.5 and just wondering if anyone can give me some tips with planning would be appriciated. Current setup: - CUCM 8.6 with Cisco Unity Connection application - Additional standalone application - Presense - Voice Gateway - Analog Gateway Plan is to upgrade the first 3 of them using new set of hardware. Thanks for your help in advance!

[Jaime Valencia]

Either use PCD to perform the migration, or DRS into the same release you have into the new HW, and then upgrade to target version.