01-26-2012 01:57 PM - edited 03-19-2019 04:18 AM
I'm staging a CER 8.5.1.10000-7 cluster in a ESX environment, but have run into an error while installing the Subscriber.
The publisher installed without issues, I've added the subscriber reference in the publisher and rebooted. When I go to install the CER Subscriber, it makes it through about 99% of the way, then pops up this "Critical Error". I've attached a screenshot of the error.
Two C210 UCS servers, both VM's were created with the same OVA file, same install media is being used. As I haven't been able to take a look directly at the error log, I don't have any ideas on why it fails.
I only have the demo license currently on the Publisher, is this possible the cause of the problem? Anyone else run into this problem?
Thanks,
Ryan
Solved! Go to Solution.
01-27-2012 06:35 AM
01-27-2012 06:35 AM
Hi Ryan,
Looks like this bug;
Cheers!
Rob
01-27-2012 07:38 AM
You the man Rob! Thanks.
I need to remember to check the bug tracker more often
01-27-2012 08:07 AM
Hey Ryan,
You are most welcome my friend
Sadly, we have to reference the Bug Toolkit far too often. Oh well......
Cheers!
Rob
02-12-2013 12:54 PM
Rob, this is happening in 8.6.1 as well . I am loading subscriber on CER 8.6.1 and same mesage. Going to try fix and see if it works,
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide