Tech Tip:What is the size of partitions created by CUCM installer ?
Partitioning is based on number of "logical" disks.With Raid Type 1(1+0) two logical drives are created on each pair of hard drives.
CUCM 6.0 Disk Partition Size 1 disk - Active and Inactive partitions get 18.25%, boot/swap get a chunk (2.2MB) and Common gets the rest. 2 disk - Active and Inactive partitions get 25%, boot/swap get a chunk (2.2MB), spare gets rest of disk 1 and common gets all of second disk.
CUCM 5.0 Disk Partition Size 1 disk - 12.2GB for Active/Inactive, 2.2MB for swap/boot and common gets the rest. 2 disk - 12.2GB for Active/Inactive, 2.2MB for swap/boot and common gets all of disk 2.
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...