We just implemented CUEAC for one of our customers and everything is working well but we have one thing that is a bit of a concern. When a user zeros out of Unity Connection (7.1) and return the Attendant Console, the call shows the external Caller ID information but nothing else so that the receptionists do not see that this call coming from voicemail at all. I changed the transfer to supervised on the UC but then it just shows up on the console with the voicemail port until they select it and then it switches to the external caller ID.
Is there any way to have the call show up with the full information (preferably with the extension voicemail info, and that is was diverted back)?
Re: Unity Connection zero out to Attendant Console
CUCM has this setting, you probably have it set to true:
This parameter determines whether Cisco CallManager displays the original calling party number for calls that are transferred from the Cisco Unity voice messaging system. Valid values specify True (display the original calling number when a call is transferred from a Unity voice messaging port) or False (display the number of the Unity voice messaging port through which the call was transferred).
This is a required field.
However this is a global setting, so any calls from CUC would show the VM port.
An alternative would be to create a translation rule so you can modify the ANI to something fixed and tell the CUEAC operators calls coming from 7777 are from VM. Leave the called party number the same, just change the ANI.
Good afternoon, I have a Cisco IP PHone 8851 with PID: CP-8851-K9 V01 with firmware 12.1.1. I was under that impression that this phone requires MPP firmware to work with third party sip provider such as voip.ms, telzio etc. Can someone advise if wit...
Hi,We have a requirement to enable Encryption on phone security profile for jabber clients, I configured this, but after that the user is not able to login from Jabber over MRA, it gives an error saying wrong username and password. However the same user c...
Good morning in this Cisco documentFeature Configuration Guide for Cisco Unified Communications Manager, Release 11.5 it saysWhisper CoachingUnified Communications Manager also supports whisper coaching, a CTI enhancement on silent monitoring wh...
Hi All,I have an issue since the upgrade where it looks like I am not getting Phone Services, IM&P is working.I have done some firewall monitoring and can see requests to port 6972 for TFTP, I have tried to connect to this port to see my jabber-config...
In future definitely the need arise that the old extensions requires to be deleted. If the extension deletion range is straight like example 1000, 1001, 1002, etc. then it’s very easy to delete. What if extension deletion it’s not in straight order like 1...