09-25-2014 03:22 PM - edited 03-19-2019 08:39 AM
Hi,
I have a small customer with CUCM 8.5 Pub and Sub. Pub is located in the DC and all the phones/gateways are registered with Sub at the office. I am using PCD simple migration process so no IP address change.
PCD simple migration is a three step process:
1) Export the data from Pub and Sub
2) Shutdown the production Pub and install/import configuration into new Pub 10.5.
3) Shutdown the production Sub and install/import configuration into new Sub 10.5.
My question is if I put a "pause" after step 2 it should not caused any outage up until that point right because all phones and gateways are registered with Sub onsite?
Thanks
Aamir
09-26-2014 05:53 AM
Hi Aamir,
You need to follow the procedure as documented in the "Migrate Cisco Unified Communications Manager to Release 10.5(1)" section of the PCD Deployment guide here
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ucmapMigrate/10_5_1/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051_chapter_01.html#CUCM_TK_M065FBB4_00
HTH
Manish
09-26-2014 06:35 AM
Correct - no impact to the Subscriber until you proceed with the upgrade.
Hailey
Please rate helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide