06-30-2021 01:13 AM
Hello,
Hi
I recently build new setup for UCS 5108 chases with 2x blade servers ( B200 M5)
using two Cisco UCS 6332 16UP FI connected to Brocade SAN Switch with one Netapp af220 storage FC mode (as show in this diagram).
In this setup blades boot from the SAN. (ESXI) everything smoothly
but I decided to reboot the blade servers to boot from CD-DVD but i found that the boot from CD/DVD no more available in the boot menu
I've try many time by change/create new boot policy from the boot order menu
as well as Re-acknowledge and Decommission the blade servers
but still same issue always i got this screen
Solved! Go to Solution.
06-30-2021 04:16 AM
In the boot order 'help' menu info, there is a note in regards to CD/DVD:
Add CD/DVD or
Add Local CD/DVD
Add Local Remote CD/DVD
In a setup with M5 blade servers, if an ISO is mapped to the KVM console, use only Add Remote CD/DVD in Boot Order.
See if that works.
Kirk...
06-30-2021 04:16 AM
In the boot order 'help' menu info, there is a note in regards to CD/DVD:
Add CD/DVD or
Add Local CD/DVD
Add Local Remote CD/DVD
In a setup with M5 blade servers, if an ISO is mapped to the KVM console, use only Add Remote CD/DVD in Boot Order.
See if that works.
Kirk...
06-30-2021 04:58 AM
thank you ...
I've spent time to find a reason + to solve it, and did not find anything , I did not expect need to activate first from KVM and then appear automatically.
thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide