Booting from SAN-SAN Target Paths are not showing

[isaac anish]

Hi community,

Here i configure in UCS booting from SAN,We created 2 vHBA-1 and vHBA-2

In vHBA-1(PRI)

Primary SAN traget-xx.xx.xx.xx.xx.xx

Secondary SAN target-xx.xx.xx.xx.xx.xx

In vHBA-2(SEC)

 Primary SAN traget-xx.xx.xx.xx.xx.xx

Secondary SAN target-xx.xx.xx.xx.xx.xx

So here i am able to see only 2 paths that to also secondary target paths of both vHBA in UCS.And in host windows MPIO that two paths are  showing the Active/unoptimized path.

Here i attached the screen shot also,Please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!

[isaac anish]

Hi thanks for your reply

here i attached the screenshot, please check and let me know ASAP.

[Marcin Latosiewicz]

You're flogi'd in.

You get (what looks like) correct answer from FCNS. 

But you do get access reject from when asking for this particular lun (compare this to the other side where you receive LUN report with a list of LUNs you have access to). 

Looks like a masking problem on the storage?