After upgrading UCS 220 M5 from 4.0(4b) to 4.3(2.230270) I can no longer ping the CIMC IP addresses outside of the current network. I can SSH to them from the VLAN and confirm the gateway is there. I had power cycled one for 10 minutes and it still isn't reachable outside of the network.
Network Setting:
IPv4 Enabled: yes
IPv4 Address: 172.17.0.205
IPv4 Netmask: 255.255.255.0
IPv4 Gateway: 172.17.0.1
DHCP Enabled: no
DDNS Enabled: yes
DDNS Update Domain:
DDNS Refresh Interval(0-8736 Hr): 0
Obtain DNS Server by DHCP: no
Preferred DNS: 0.0.0.0
Alternate DNS: 0.0.0.0
IPv6 Enabled: no
IPv6 Address: ::
IPv6 Prefix: 64
IPv6 Gateway: ::
IPv6 Link Local: ::
IPv6 SLAAC Address: ::
IPV6 DHCP Enabled: no
IPV6 Obtain DNS Server by DHCP: no
IPV6 Preferred DNS: ::
IPV6 Alternate DNS: ::
VLAN Enabled: no
VLAN ID: 1
VLAN Priority: 0
Port Profile:
Hostname: C220-WMP254200QD
MAC Address: E4:4E:2D:54:0B:B8
NIC Mode: dedicated
NIC Redundancy: none
VIC Slot: none
Auto Negotiate: yes
Admin Network Speed: auto
Admin Duplex: auto
Operational Network Speed: 1Gbps
Operational Duplex: full
