Cisco UCS R-200

[aviyoshi10]

Hi,

can i configure R-200 with Teaming Active\Standby ?

thanks,  

[padramas]

Avi,

I assume your question is about out-of-band management interfaces.

If you are using shared LOM mode, then you get the option to select NIC redundancy features.

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/install.html#wp1356357

If it is in dedicated mode, then we do not have the option as it has only one NIC interface for the management processor.

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644227.pdf

HTH

Padma

[aviyoshi10]

Hi,

i need teaming not for the management interfaces but for the data NIC's

[padramas]

Avi,

Depening on the OS installed on the server, you can choose the NIC teaming options for the host NIC interfaces.

What OS do you have on the server ?

HTH

Padma

[ranganathan.madhanagopal]

You need to download the NIC teaming software from Intel for the onboard Intel 82576NS PCIe-based

NIC cards.