08-21-2014 04:26 PM - edited 03-01-2019 11:48 AM
Looking for a Design Guide where I can see how exactly design and configure Cisco UCS Blade Series Servers with (2) 2200 IOMs to Fabric Interconnects. I like to see how Fabric Interconnects connect to Cisco FEXs.
The design guides I have downloaded from Cisco only talks about Cisco FEXs at a very high level, not going into too much details how they connect to Fabric Interconnects.
As I understand correctly, Fabric Interconnects itself have may server ports that connect down to Chassis IOMs. Trying to understand how Server Ports on Fabric Interconnects can work inconjuction with Cisco FEXs.
08-22-2014 01:11 PM
Hi Abbasali,
Cisco FEXes in UCS are use for C-Series server integrations. You won't be able use the FEXes to expand the number of ports on your fabric interconnect.
C-Series integration documentation below
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-1/b_UCSM2-1_C-Integration/b_UCSM2-1_C-Integration_chapter_01.html
Don't forget to rate any useful posts.
08-23-2014 12:16 PM
fex can directly connect to fabric interconnect
http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-5100-series-blade-server-chassis/ucs_kaon_model_preso.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide