Corrupted Init Sequence on the Bios

[skumar7193]

On the UCSM Under - equipment -> Chassis -> Chassis n -> Server -> Server n -> installed firmware tab -> right click on BIOS -> copy xml

If you inspect the xml the following property is corrupted. What could cause this corruption.?

Since this is corrupted, the resulting xml is bad (malformed) and I cannot talk to the UCS via api.

a good init sequence

initSeq="0x89:0x60:0xbe:0x00:0x00:0xcc:0xbe:0x04:0x00:0x68:0x00:0xae:0x3b:0x00:0x00:0x01:0x80:0x80:0xbe:0x01"

[padramas]

Hello,

They are BIOS POST codes.

Can you please provide following information

Blade model

XML value from non-working blade

Is this new blade or has this worked before ?

Is it associated with a service profile ?

UCSM  version ?

There is a known issue which is fixed in 2.0.2m version and above.

De-commissioning and re-acknowledge the blade will do the trick.

Padma