Create FI6248 SAN Port-Channel - No Operational Members

[Hungnt_sbd]

My problem is similar to this discussion:

https://supportforums.cisco.com/thread/2169563

The environment is UCS 2.1(1a), 6248s, 5548s.

The configuration is exactly the same as well as the symptoms. I already enabled fport-channel-trunk feature, and verified it with "show feature" command.

Really appreciate if someone can give some diretions to figure this thing out.

Thanks for your help.

[padramas]

Hello ,

What is the version on N5K ?

Does it work if you configure it as individual links ?

Can you please check if you are running OUI issue ?

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCty04686

HTH

Padma

[Hungnt_sbd]

Hi,

Thanks for your quick support. I'm gonna check the version on N5k when I get back to the customer's site.

Its working fine when I configure ports as individual links.

I uses the default WWPN pool of UCS (20:00:00:25:B5:00:xx:yy). Trunking mode is off as well.

Regards,

Hung

[Hungnt_sbd]

My bad,

N5k version is 5.2(1)N1(1), Port WWN OUI from UCS FI is indeed xx:xx:00:2a:6a:xx:xx:xx. So it looks like this is OUI issue CSCty04686.

I guess the solution now is updating the N5k to 5.2(1)N1(4) version?

[padramas]

Hello,

Yes, you can upgrade N5K to version that has fix for this defect.

Padma