FCoE support on Nexus 93180YC-FX

[Networker0]

Hello Team,,

we are migrating from N5K to N9K. The nexus 5K has ports working as FCoE, when we configure the same configuration on the Nexus 9k (vfc ..... ) , no FLOGI database have been found. and the vfc trunking state is stucked in (initializing).

Any ideas

[balaji.bandi]

Doe the feature enabled

have you configured other side also ?

vfc trunking state is stucked in (initializing).  (most cause both the side config)

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/san_switching/configuration/guide/b-cisco-nexus-9000-nx-os-san-switching-configuration-guide-933/n9000_managing_flogi_name_server_fdmi_and_rscn_databases.html

Good troubleshooting tips :

 https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2019/pdf/BRKDCN-2291.pdf

[Banega16]

I have this problem!  I migrate NK5 to NK9 and vfc don´t up, only remains in the initialization state!!