Getting error code F1259 and F1260

[Deepali]

Hi Team,

I am getting error (F1259 and F1260) in UCSC-C240-M4SX.  Please find the details below and please help me how i proceed further wit

severity: 1
faultnum: 19
cucsFaultTags: 2
cucsFaultIndex: 3573547266
cucsFaultSeverity_str: info
entity_DN: sys/rack-unit-1/board/storage-flexflash-FlexFlash-0/card-1
fault_DN: sys/rack-unit-1/board/storage-flexflash-FlexFlash-0/card-1/fault-F1259
entity_RN: card-1
faultCode: F1259
dn: sys/rack-unit-1/board/storage-flexflash-FlexFlash-0/card-1
faultname: fltStorageFlexFlashCardMissing
prevSeverity: 0
prevTimeOfEvent: 2024-06-22T22:37:01
cause: equipment-missing
description: "Flex Flash Local disk 1 missing: reseat or replace Flex Flash Local disk"
occur: 1

%CIMC-5-EQUIPMENT_DEGRADED:[F1260][warning][equipment-degraded][sys/rack-unit-1/board/storage-flexflash-FlexFlash-0/vd-1] Flex Flash Virtual Drive 1 (Hypervisor) Degraded: please check the flash device or the controller

[marce1000]

  - For comments ,including recommended actions , look up these faults in :
                   https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/faults/reference/3-0/UCSFaultsErrorsRef_3-0.pdf

 M.

[Deepali]

Thanks a lot for your help. Do I need to replace the SD card?? If yes, then both card need to be replaced or only one?/

[marce1000]

       - I have no authoritative insights  on that   , best is to contact Cisco (TAC)

 M.

[Kirk J · Accepted solution]

You only need to replace the failed SD card (appears to be one in slot 1).

Unfortunately M4s are completely end of support, so it will not be possible to open a TAC case.

Depending on the SD card size, you may be able to find one online somewhere:

UCS-SD-128G 128 GB SD Card for UCS Servers
UCS-SD-64G-S 64 GB SD Card for UCS Servers
UCS-SD-32G-S 32 GB SD Card for UCS Servers

Kirk...

[Deepali]

Thanks a lot Kirk for your help. I will proceed with the SD card replacement.