Howdy Folks, Can anyone confirm if the UCS-FI-6454 can support a copper 10GBASE-T SFP+ module, specifically the SFP-10G-T-X? So far, all I've check the optics compatibility matrix and the 6400 spec-sheet and I see no mention of this module being supp...
Forum Posts
If I modify the Firmware Policy with an incorrect version of firmware and it generates pending activities for hosts to get that on next reboot. But I don't want them to get that firmware version. Do I just go into pending activities and cancel them...
Summary:Can ssh into user-2 admin account using password ssh (or via the Web UI)can not use publickey with ssh, always prompts for passwordUser Guide for C-Series doesn't specify any requirements for public key type/bits that i can findI have ssh ena...
Resolved! UCS C220M3
Dearsi have a failed HDD for UCS 220M3 servers "Seagate Constellation.2 500GB 7200RPM SATA 6Gbps 64MB Cache 2.5-inch " i have been on the below link for the HDD specs. but now all those listed in the spec sheet are EOS/EOSupport, so i approached in ...
We are attempting to upgrade our current VMWare environment from v6.7 to v7.0U3.We were able to upgrade vCenter with little trouble.However, attempting to upgrade our ESXi host - we only have one on this particular hypervisor - has not been as easy.F...
Hi,I am having a weird issue with KVM Launching in a B200 M5 Blade. When I am trying to launch the console without the service profile, I can get to the console normally, whereas when I am launching the console post association of service profile. I ...
Hi All,I am unable to do the cisco hyperflex (Contains 4 nodes) upgrade from and keeps on getting below error. I have already checked firmware/software compatibility before upgrade and also ran pre-check script with no errors/warning in output. ...
Hi everyone,I am having some issues, we have 3 UCS C240 M5 nodes, that have previously been running using the Hyperflex platform and FI.Now we are trying to repurpose them to run another site for us, my superiors made the decision that we will run th...
Anyone knows if is possible and how to do a repurpose of Hyperflex M5 nodes in UCS Managed Mode to use that nodes to install Nutanix cluster with AHV Hypervisor?
Listen here: S11| E2 Cisco Compute Hyperconverged with Nutanix Cisco recently announced a strategic partnership with Nutanix that aims to deliver the industry’s most complete hybrid cloud solution to simplify customer operations, maximize resiliency,...
Hello,I am running cisco UCSM package version 4.2(3d), I joined 2 C240M4L both running 4.4.0.2f for the BIOS and 4.0(2I) for the CIMC firmware trying to upgrade to 4.1(2k). both were discovered successfully, however when I applied the service profile...
A customer has a UCSC-C220-M3SBE on vsphere>Configuration>Health Status>other I noticed an alert stating : System Board 0 SEL_FULLNESS---Upper fatal What is the impact and how to fix this??!
Hi,I currently have a Cisco UCS-M6-MLB server in standalone mode. We need to convert it to UCS managed mode without losing any data or downtime.What would be the best possible approach and the UCS manager version recommended.Thanks.
I have some older N20-C6508 chassis, which I understand are still supported. I would like to run UCSB-PSU-2500ACDV PSUs on the same chassis as UCSB-PSU-2500ACPL PSUs. Is this possible? Or is it at least possible to keep the chassis running while r...
