Maximum uptime for UCS-FI-6248UP

[Denis Mit]

Hello ! What could be the maximum uptime for UCS-FI-6248UP ? In some sources I have seen, that uptime must be not more then 730 days. Prompt please, is it true and is it possible to find this information in official documentation of Cisco (the version of UCS manager-3.2(3k)

[PhP]

Afaik there's no specific uptime restriction (it could be a bug that hits you after some amount of days, but that's not a generic situation), but i'd still not recommend keeping the FI not up-to-date for such a long time.

Also, 3.2(3k) itself is 6-year old, so i'd think about firmware upgrade, keeping in mind that 6200 is not supported anymore.

[Kirk J]

Any specific uptime threshholds published would have been related to bug(s).  There were a few such as one tied to firmware in internal SD/flash drives that UCSM/NXOS ran off of, as well as some services like snmp, etc.

The 6200 series highest supported UCSM version is 4.23 range (assuming you don't have deprecated rack/blade hardware like the M3s)

As other's have noted, the 6200s are past last day of support, so there is no ability to open TAC case or get an RMA.  You may be best to leave the units as is, and hopefully aren't using for production.

Kirk...