Hello, I have a project where I am trying to utilize two UCS servers from my environment for a webex mesh implementation. The tricky part involves the uplink networking to core switches. I have the 6248 currently in place and it has port channel up to an existing switch. This supports a working environment with Vcenter. For this new project we want to run more uplinks (port channel) into a separate core switch and only have two UCS servers have access to it while the other servers continue to use the existing port-channel. These two servers will only need access to one VLAN but it must go up to this other core switch and not the existing working port-channel. So I have created the policies and service profile to be applied to the servers where the vNIC has the desired VLAN defined. I have a few questions on the feasibility of this working:
1. Can the UCS FI uplink with a port-channel into two separate switches where the service profile determines the vNICs and VLAN to utilize a specific port-channel.
2. Would I have to utilize the LAN Pin group to be sure the VNics associated to the LAN connectivity policy are configured only for the new port-channel.
thank you...
