03-03-2015 01:21 PM - edited 03-01-2019 12:03 PM
We have 4 new B260 M4 blades, and I am wondering if they can be installed in the 3rd and 4th row of the chassis or do they have to be in the top 2 rows?
Thanks!
03-03-2015 09:57 PM
.
03-03-2015 09:58 PM
Hi Jefferson,
No problem to install wherever you want. All slots in the chassis have the same architectural connections.
Regards,
Richard
03-03-2015 10:27 PM
Hi Jeff
The intallation guide below recommends the following:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/blade-servers/B260_M4.html#ID450
03-04-2015 11:07 AM
Hi manvelas,
There is an issue that might happen when removing the slot divider firstly from the bottom to the top, , the order where the server is installing in the chassis doesn't change anything, just the server number in the discover process.
Anyway you can follow the procedure mentioned in the document.
Richard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide