Please help with server c220 m3 , Im done !!!

[nomoreyou]

i have 2 hard disks 3 tb for each , i tried to install windows server 2012 for one week till now i cant do it , i tried UEFI , i made UEFI windows and convert the hard disk to gpt when the installation is done , i cant boot , i tried to fix bcdboot and bcdedit and doesnt help . i read that is somthing related with the south bridge but when i enter the bios i found just enabled and disabled .

so please someone help

[Walter Dey · Accepted solution]

Is this a standalone C220 ?

Have a look at http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

and verify your Version settings

W2012 or W2012 R2

Which I/O adaptor ?

[nomoreyou]

i tried it i have 1.5(1)b ucs and i cant found it, and UCSC 220 M3l , W2012

[Umar Khayam]

what do you mean you have 1.5(1)b ?

to my knowledge this doesn't exist .

Can you provide overview what you are trying to do ?

What errors are you getting ?

Have a look at this 

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220/install/C220/raid.html#37150

[nomoreyou]

thank you for your replay,

i tried to install windows server 2012 r2 on c220 m3 server but UEFI copy . i put myUEFi copy on usb and boot and convert the disk to gpt and after the installation complete , i couldnt find the windows and i cant boot from it . i enabled the UEFI from the Bios .
 

[Umar Khayam]

Are you using any raid controllers or raid setup ?

https://supportforums.cisco.com/discussion/11838546/ucs-c22-m3-software-raid-lsi-problem-hard-drive 

Have you contacted TAC?

[nomoreyou]

i used Raid 1 Mirror .  i have two hardisks 3tb for each , so i convert the hard-disk to GPT and i have problem after the installation

[nomoreyou]

pleaase any one can help???