cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
408
Views
0
Helpful
2
Replies

RAM not detecting

tekbird
Level 1
Level 1

Hi, I use a Cisco UCS 240 Server. Recently I installed 4 additional modules of 32GB RAM along with the existing 4 modules of 32 GB RAMs. I installed them on A1, B1, C1, D1 and G1, H1, J1, K1, but the one on B1 is not being detected. Any ideas why?

2 Replies 2

marce1000
VIP
VIP

 

      - Perhaps the one on B1 is bad , try to swap the ram module(s) , 

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Kirk J
Cisco Employee
Cisco Employee

Agree with other responder.  Try swapping DIMMs, and see if issue follows the DIMM currently in slot B1.

Occasionally you can have issue with dimm seating, or in rare instances, an issue with the DIMM slot itself.

Kirk...

Review Cisco Networking for a $25 gift card