Hi folks,
in my UCS Cluster i have four Blade servers. Two B200 M3 and two B200 M4.
The M4 servers have two adapters in inventory:
UCSB-MLOM-40G-03 and UCSB-VIC-M83-8P.
Now my question is:
Should i separate my vHBA (fc0 and fc1) on two vCONs (four are shown in "Modify vNIC/vHBA placement" configuration) or do these two LOM adapters count as "ONE" vcon.
I still don't get this completely. Even after reading some of the topics here with vCons.