During the implementation of UCS Blades I found a number of issues that have not been solved. I need to monitor the UCS solution through a NMS with traps and monitoring certain items. To do this I require deliver the MIBS to the Monitoring group and tell the OIDs to monitor certain things but I dont found especific documentation about this. I need to monitor things like the states of the fans, cpu, memory and connections.
The solution consists of:
Fabric Interconnects: 2 x 6140XP
Chassis: 9 x 5108
Servers: 70 x B230M2
Although i need apply certain security to SNMP like ACL to secure the solution in the Customer Environment.
UCS MIBs are available here for download
MIB reference guide
Currently I am not aware of doc or tool that provides direct translation of UCS MIB objects.
OID for FAN inventory -- 184.108.40.206.220.127.116.11.718.104.22.168
OID for fault table -- 22.214.171.124.126.96.36.199.7188.8.131.52.1
Alternate way is to load the MIBs and browse the table for required objects.
This the reference guide for UCS MIBs:
Or go over the supported MIBs:
Based on the that, you can then go into the OID repository and see what OIDs are available in the specific MIB:
Hope it helps,
Hi @bobbywayne08569 ,
To locate any desired OID, go the supported MIB list by UCS C: ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/
Or you can find additional details about the MIBs here: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/mib/b-series/b_UCS_MIBRef/UCS_MIBRef_chapter_01000.html#reference_935B3C0D78E14A14B8D36FBD4A8D2883
Once you know which MIB contains the desired info, go and see all OIDs using this: ftp://ftp.cisco.com/pub/mibs/oid/
Hope it helps,