10-19-2018 01:52 PM
I think I exhausted all possibilities where the fault may resides. Please note this is non vpc - vpc feature is not on. Tried bouncing the interface with no luck. What else could be the issue anybody? Thanks in advance.
N5K1(config)# sh int vlan 10
Vlan10 is down (suspended), line protocol is down
Hardware is EtherSVI, address is 00de.fb12.1a7c
Internet Address is 10.0.1.51/24
MTU 9216 bytes, BW 1000000 Kbit, DLY 10 usec
N5K1(config-if)# sh spanning-tree vlan 10
VLAN0010
Spanning tree enabled protocol rstp
Root ID Priority 32778
Address 00de.fb12.1a7c
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32778 (priority 32768 sys-id-ext 10)
Address 00de.fb12.1a7c
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Eth1/1 Desg FWD 2 128.129 Edge P2p
interface Ethernet1/1
description TO WINDOWS JUMPBOXES
switchport access vlan 10
spanning-tree port type edge
version 7.3(2)N1(1)
vlan 10
vn-segment 10100
interface Vlan10
no shutdown
mtu 9216
vrf member transit-l3-vni
ip address 10.0.1.51/24
10-19-2018 03:52 PM
Anybody?
Forgot to mention. these svis are part of l3vni belonging to mp-bgp evpn vxlan concept but still that shouldn't matter. Its simple l3 svi at the end of the day.
10-22-2018 06:44 AM
Can you post the interface nve configs ?
have you configured suppress ARP ?
10-22-2018 07:26 AM
Issue was around using fabric forwarding in global but svi not being part of it thus suspending it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide