09-19-2013 11:52 AM - edited 03-04-2019 02:25 AM
Hi guys,
We have a UCS220 which seems to keep randomly restarting on us. We only have 1 PSU attached at the minute, but is connected to a UPS and no other devices connected to the UPS are having any problems.
The last restart happened today at about 3pm and looking at the CIMC logs, I can see a critical error to do with PSU redundancy, but as we only have one connected, I guess this is to be expected. Is there anything else in the logs that might point to a particular reason?
BIOS - C220M3.1.4.7b.0
CIMC - 1.4(7a)
Thanks
Sean
09-19-2013 12:00 PM
The PS redundancy lost alert should be expected since there is just one PSU installed.
However, by just looking at the SEL logs, it's hard to tell why it rebooted.
Is there an OS already installed?
Probably we need to look at some other logs on the tech support file to get a better idea about why it reboots.
09-19-2013 12:03 PM
Hi Zaira,
We have ESXi 5.0 installed with 4 VMs (CUCM, CUC, CUP, CUACEE). I've had a look at the ESXi logs, but they also don't seem to say much.
How can I get a look at the tech support file?
Thanks
Sean
09-19-2013 02:25 PM
Hi Sean,
I suggest to open a TAC case if you haven't had a case already. This requires further troubleshooting as the issue is not really clear. Many conditions can lead a server to keep on rebooting, power issues, memory, cpu faults, etc. Please provide date and time when the server experience this condition or relevant events from the OS if any.
Please also attach a tech support for its review.
Please visit this link to collect the file.
http://www.cisco.com/en/US/products/ps10281/products_tech_note09186a0080bdf11c.shtml
Regards,
Chris
04-29-2024 06:38 AM
Good day Support
I have the Cisco C220 M3BE Hardware Server and it keeps restarting even though the Power Supply is working. What could be the root cause.
Regards
CHUMA
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide