Solved: UCS C200 m2 does not boot

yasser_abbass · ‎08-02-2015

Hi there,

I have two C200 m2 one of them is not working at all, when I turn it on nothing comes on the screen and the fan is spinning like crazy.

The lights on the front panel are green nothing umber but it just does not boot no POST nothing.

Not sure what is the problem. Can anyone direct me to the right diagnostics

thanks in advance.

yasser_abbass · ‎08-03-2015

Thank you for your response Saurabh,

Well Actually I did it, you gave me an idea (component failure) so I started by removing the RAM and CPU's and it ended up with CPU1 is not working

So I placed CPU2 in it's place and the Server started to boot.

thank you very much for your help and support

Saurabh Kothari · ‎08-02-2015

Yasser,

It seems corrupt BIOS.

Did you power cycle the server? taking all the power supplies out, let it rest for 3-5 minutes and power it on again.

I would suggest you to open a TAC case and get the logs analysed. it could be a failed component!

-SK

yasser_abbass · ‎08-03-2015

Thank you for your response Saurabh,

Well Actually I did it, you gave me an idea (component failure) so I started by removing the RAM and CPU's and it ended up with CPU1 is not working

So I placed CPU2 in it's place and the Server started to boot.

thank you very much for your help and support

Saurabh Kothari · ‎08-03-2015

I believe a TAC case should resolve your problem :)