UCS C210 M1 SATA 2 Compliance

[Jose Luis Farfan Vasquez]

Hello there,

This might be a dumb question but i need to ask it before making a mistake.

I have a UCS C210 M1 that needs to get more storage space; i see in de datasheet that it holds 500 GB 7200 RPM SATA hard drives., but i want to know if it would work with a SATA2 Disk, regardless of it working at SATA speed.

My question is if the UCS C210 M1 would work with SATA2 disks.

Thanks in advance.

[Robert Burns]

Jose,

Which RAID controller do you have in the system?

Embedded Intel ICH10R

LSI 1064E

MegaRAID 9200 Series

Robert

[Jose Luis Farfan Vasquez]

It seems to be a LSI Logic 1064 Serial Attached SCSI RAID Controller.

[Robert Burns]

That controller should have no problem with SATA 2 disks.   The controller supports both 1.5Gb/s and 3.0Gb/s speeds.

Robert

[Jose Luis Farfan Vasquez]

Hello, thanks a lot for your response. I wasn´t quite sure of my answer because i'm having second thoughts about it, so i took a picture of the storage details under the Inverntory section in the Config Utility. I´m not sure if it has both Embedded Intel 1064E and LSI Logic 1064, or if it has just the Embedded one.

I hope this pic could add more to know if it has the raid controller i mentioned or if it depends in which disk dock i connect the hard drives to.

Thanks in advance Robert.