UCS C240 M4 vKVM No USB Input

[aortner01]

I've been using a UCS C240M4 for quite a while with an external kvm but figured maybe someone here could help me get the onboard vkvm working. When launched from CIMC I get no keyboard or mouse input. Just recently updated to the latest firmware with no change but not sure if there is a setting I'm missing or somewhere where I can reset the settings specific to the vKVM. 

[Kirk J]

Let's confirm the system think's KVM is enabled :https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/3_1/b_Cisco_UCS_C-series_GUI_Configuration_Guide_31/b_Cisco_UCS_C-series_GUI_Configuration_Guide_31_chapter_0111.html#task_3F20D34C84A04DCBA726B5A4991ED15E

There are some other USB type settings that may also be impacting this.

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/3_1/b_Cisco_UCS_C-series_GUI_Configuration_Guide_31/b_Cisco_UCS_C-series_GUI_Configuration_Guide_31_chapter_0100.html#task_xs1_d4z_j1b

Legacy USB Support<<<

USB Port KVM  <<<<

Kirk...