cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
586
Views
0
Helpful
1
Replies

UCS Director, problem add UCS Serie-C

Hi,

 

I have problem with UCS Director 5.0, the problem ocurr at the moment add the server UCS C200 M3, the error is as follows, the version of CIMC is 2.0(3d).

 

connectivity issues are discarded as UCS UCS Director & CIMC are within the same network, have been tested with different servers getting the same problem.

Thanks!

 

 

1 Accepted Solution

Accepted Solutions

tei.cho01
Level 1
Level 1

Hi,Cristobal

 

Have a look at the Compatibility Matrix for Cisco UCS Director, Release 5.0

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/compatibility-matrix/5-0/UCSDirector-CompatibilityMatrix-50.html

It says that UCSD supports CIMC from 1.4 to 1.5.

So, try to upgrade UCSD to 5.2 or 5.3. 

View solution in original post

1 Reply 1

tei.cho01
Level 1
Level 1

Hi,Cristobal

 

Have a look at the Compatibility Matrix for Cisco UCS Director, Release 5.0

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/compatibility-matrix/5-0/UCSDirector-CompatibilityMatrix-50.html

It says that UCSD supports CIMC from 1.4 to 1.5.

So, try to upgrade UCSD to 5.2 or 5.3. 

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card