05-17-2014 01:43 PM - edited 03-01-2019 11:40 AM
I bought new cisco ucs C220 M3 server and install esx from cisco custom iso
But when i run esx ten minutes later system down . And storage adapter missing . Like photo
05-18-2014 12:33 AM
Hi,
most probably your UCS server firmware needs an update as this was a common issue in the older release.
Please check the document URL:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/OL-31202-01.html#pgfId-543961
i.e.
Following defect was resolved in Release 1.5(4e):
Symptom For systems that use the LSI SAS 2008 Mezz, LSI 9240 and 9220 PCIE adapters, when IOMMU is enabled on these systems:
Workaround None. (CSCun30636)
hope this makes your day
06-09-2014 07:57 AM
Thank khalid.ibrahim
We are try ing to update firmvare during 23 day only show this screen http://prntscr.com/3r4wi5
06-09-2014 12:42 PM
Hi,
i know the following might seems odd, but have you followed the instruction of upgrading the firmware. have you used the one on the flexFlash or from ISO file boot loader.
i believe i have run so many servers Cisco's non of them has stopped or hanged while loading.
this is maybe your good luck so you will explore a new issue that cisco can fix.
i would be happy to help you if just you can list the steps you e=went through to upgrade the firmware or even remote login.
BR,
Khalid
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide