Hi all, I need some advice on my the HW and licenses required for uplinking the UCS6454 at 100gb to the Nexus 7K series.
I actually have two sites, so one site is using the 7710 series and the other is the 7004 series, can you advise me if i'm on the right track here the termination of the UCS QSFP is unfamiliar to me. The design at a high level is 2 x 7710 Nexus connected redundantly to the UCS FI 6454's at 100gb BoM :-
Site 1 - 2 x 7710 chassis, 2 x UCS FI 6454
| UCS-L-6400-100G | UCS 6400 series ONLY Fabric Int 1 Port 40/100 Gbps port license | 4 |
| QSFP-100G-SR4-S | 100GBASE SR4 QSFP transceiver, MPO, 100m over OM4 MMF | 4 |
| N77-F312CK-26 | Nexus 7700 F3-Series 12-Port 100G Ethernet Module | 2 |
| CPAK-100G-SR10 | 100 Gigabit Ethernet Cisco CPAK Module | 4 |
Site 2 - 2 x 7004 chassis, 2 x UCS FI 6454
| UCS-L-6400-100G | UCS 6400 series ONLY Fabric Int 1 Port 40/100 Gbps port license | 4 |
| QSFP-100G-SR4-S | 100GBASE SR4 QSFP transceiver, MPO, 100m over OM4 MMF | 4 |
| N7K-F306CK-25 | Nexus 7000 F3-Series 6-Port 100G Ethernet Module | 2 |
| CPAK-100G-SR10 | 100 Gigabit Ethernet Cisco CPAK Module | 4 |
thanks
