Unified Computing System Discussions

When I went to download UCS firmware for upgrades I had three files showing: ucs-k9-bundle-infra.4.1.2a.A, ucs-k9-bundle-b-series.4.1.2a.B and ucs-k9-bundle-c-series.4.1.2a.C. But I also see packages ucs-dplug-5.0 one one and on another I see 5.0 and...

I've completed the Prepare for Firmware Installation for the chassis and blades. When I execute the install infrastructure, then chassis, then server firmware - what state should the ESX servers be in?

If you have two UCS each with a pair of of 6248 fabric interconnects, configured similarly (same VLANs for ex) - what should be considered when moving a blade from one chassis to another? We're moving to a new cage and we will be using 6248s in the n...

We are moving cages at DC and I want to bring up a new pair of fabric interconnects. 1st) What is the next generation hardware as UCS-FI-6248UP is beginning its EOL journey? 2nd) If I backup the configuration of the UCS-FI-6248UP, can I upload this c...

I have a Cisco UCS C240 M3 server that the bios flash image corrupted.I followed steps to recover the bios but as below image, this machine couldn't find a recovery.cap file..I just plugged my USB stick and the recovery.cap file is in root folder of ...

Hello we are trying to upgrade our UCS 240 VMware from versio 6.5U3 to 6.7 U3. However we are facing the error message below: <MISSING_DEPENDENCY_VIBS_ERROR:Found=['Cisco_Systems_Inc._bootbank_ucs-tool-esxi_1.0.0-1OEM']Expected=[] These vibs n the ho...

I am on the CIMC and when I select Launch KVM Console,  I get a pop up a Do you want to continue ? I select ContinueIt goes to starting application, Verifying application. ( takes about a minute )   then pops up a  Do you want to run this application...

Hi,I run into problem with kvm.When i try to run kvm console i get "connection failed" , but i manage to connect once from 10 times.I have "Managament IP Pool" and i can see assigned ip addres to my blade server.Is someone have the same issue ?Thanks...

Hi,I'm trying to connect to KVM Console but I'm getting "Connection failed".I've read the other posts in the forum with the same problem but I can't solve it.Anyone can help me? Thanks.

Hello,We have a semi-new 12.5 CUCM setup. I am currently experiencing the "License Authorization Status: Failed". on the Unity Connection servers only. When I run "Utils Diagnose Test" I get the reverse DNS lookup mismatch error. The entries in DNS a...

I've heard someone say while working on a recent project.The environment is a structure where ESXi is installed on the blade and connected with Fabric Interconnect and the upper switch. The person said that if servers communicate with each other in t...