UCSC-C240-M4S2 Severe Fault

[Camilo Enrique Barbaste Andrade]

Good morning,

I have an alarm on UCS server, please if anyone has any idea what may be the origin of this fault has not reoccurred just appeared and has remained alarmed. Cisco attached capture CIMC.

I hope your comments.,

Thanks and regards,

Camilo

mmxvi

[Walter Dey]

Hi Camilo

I assume this is a standalone server, not UCSM managed ?

- Did your server work ever ok before

- does it have 2 CPU ? or just 1 ?

Walter.

[Camilo Enrique Barbaste Andrade]

Good morning Walter,

Thank for your response, in attach files you can finds detail about our UCS server, please say me if you need other details.,

regards,

Camilo.,

mmxvi

[Walter Dey]

Ciao Camilo

Please check the "Inventory"; it looks to me, that this server has only one CPU complex ! you should see that when opening the server as well.

In this case the message would be understandable.

If you have 2 CPU, then something is very bad, and I would open a TAC case, which most likely requires a RMA

Walter.

[Camilo Enrique Barbaste Andrade]

Good afternoon Walter,

Thank you very much, i attach capture with the inventory screen and the server have one CPU.

I understand that if in this case we have 1 CPU is no problem???.,

Thanks and regards,

Camilo.,

mmxvi

[Walter Dey]

Ciao Camilo

Yes true ! Don't know if it is possible to remove this error message, which is true, but misleading for this configuration.

Walter.

[Camilo Enrique Barbaste Andrade]

Good morning Walter,

Thank you for your response, i will wait if this alarm appear again, in this case may be the correct way will be open TAC case.

Thanks and regards,

Camilo

mmxvi