cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
721
Views
0
Helpful
1
Replies

Unable to detect boot from SAN

Justin Acera
Beginner
Beginner

Hi,

 

We have a spare Cisco UCS B200 M2 server and we used it to replaced a defective server in the UCS chassis. We disassociated the Service profile from the defective one and associated it to the spare. After booting the spare server, we got the following error in Faults and was unable to detect boot image from SAN. Any idea what caused the problem? 

 

 

Thanks,

Justi

1 Reply 1

Wes Austin
Cisco Employee
Cisco Employee

It looks like the LUN may not be accessible, but hard to tell with just that screen capture. You can use this document for some troubleshooting guidance:

 

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_0110.html 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: