cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
849
Views
0
Helpful
2
Replies

WWPN communicating from which FC Port

kunal.bhadra1
Level 1
Level 1

Hi,

 

Need one help. We have CIsco UCS with 6248 FI, 11 Chassis with 8 M3 B200 Blades, 2204XP IOM modules, 1240 VIC cards on blades for network and storage communication. VMware ESxi 5.1 is running on all the UCS blades. Four Ports on Each FI-A and FI-B are configured as FC port to communicate with storage arrays.

 

Now I would like to find out which host (HBA WWPN) is using what FC port to communicate with storage. How to find it out? Please help.

 

 

1 Accepted Solution

Accepted Solutions

Kirk J
Cisco Employee
Cisco Employee

Greetings.

Login to  each FI's cli

#connect nxos

nxos#show npv flogi-table

 

The output will show the vFC # that represents a blades vHBA, and the pinned to external FC interface.

Also, you can look at a service profile's vif paths tab, and see the external FC interface the vFCs are pinned to.

 

Thanks,

Kirk...

View solution in original post

2 Replies 2

Kirk J
Cisco Employee
Cisco Employee

Greetings.

Login to  each FI's cli

#connect nxos

nxos#show npv flogi-table

 

The output will show the vFC # that represents a blades vHBA, and the pinned to external FC interface.

Also, you can look at a service profile's vif paths tab, and see the external FC interface the vFCs are pinned to.

 

Thanks,

Kirk...

Perfect. Thank you very much.

Review Cisco Networking for a $25 gift card