*Keep in mind that is for M6 only and SW release 4.2(1) or later.
A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-188.8.131.52.iso
Dear Cisco Geeks, Based on this information https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c-series-rack-servers/214407-installing-rhel-on-a-standalone-ucs-c240.html Please help us to searching and finding reference for...
We have migrated away from using mirrored SD cards due to the issues presented in vSphere 7. We are now booting from SAN and using a local disk policy of "No Local Storage" with FlexFlash State disabled. The hosts still have SD cards present, some with fa...
Hi all, we are going to upgrade our existing 6248UP Fabric Interconnects to new 6454 FIs and are currently planning the migration. I have read through the migration guide at https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager...