cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2698
Views
1
Helpful
4
Replies
Cisco Employee

Regarding WWN of HBA

Hi,

I need help some help for UCS B series and C series device for getting the HBAs  detail using MIB I have checked the cucsAdaptorHostFcIfTable table [CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB ]  where I able to get the details for HBAs but in the table it is returning WWN information, I have checked all the WWN available in the table cucsAdaptorHostFcIfWwn , cucsAdaptorHostFcIfOriginalNodeWwn ,cucsAdaptorHostFcIfOriginalWwn  none of this is returning any value but cli has the information of the WWN below is the snipped from CLI

sjo-i1-fab1-A# scope adapter 2/1/1

sjo-i1-fab1-A /chassis/server/adapter # show host-fc-if

FC Interface:

    Id: 1

    Wwn: 20:02:07:97:A0:00:00:4E

    Original Wwn: 20:00:00:26:51:09:5F:6C

    Model: ISP2432-based 4Gb Fibre Channel to PCI Express HBA

    Name: fc0

    Operability: Operable

    Order: 3

    PCI Addr: 04:00.0

    Persistent Binding: Disabled

    Side: Left

    Max Data Field Size: 2048

    Fabric ID: A

    Port ID: 1

    Slot ID: 1

    Peer Port ID: 0

    Peer Slot ID: 0

    Peer Chassis ID: N/A

    Current Task:

    Id: 2

    Wwn: 20:02:07:97:B0:00:01:4E

    Original Wwn: 21:00:00:26:51:09:5F:6D

    Model: ISP2432-based 4Gb Fibre Channel to PCI Express HBA

    Name: fc1

    Operability: Operable

    Order: 4

    PCI Addr: 04:00.1

    Persistent Binding: Disabled

    Side: Right

    Max Data Field Size: 2048

    Fabric ID: B

    Port ID: 2

    Slot ID: 1

    Peer Port ID: 0

    Peer Slot ID: 0

    Peer Chassis ID: N/A

    Current Task:

sjo-i1-fab1-A /chassis/server/adapter #

So can anybody tell me If I am doing right MIB table query

Thank & Regards

Ruhul

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Enthusiast

Re: Regarding WWN of HBA

Have you looked at: ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html

Also, all the right people are on this community forum who would know about SNMP, but you could also contact TAC or your account or channels team

4 REPLIES 4
Enthusiast

Re: Regarding WWN of HBA

If you are willing to use PowerShell with PowerTool for UCS I have a WWPN/WWNN collector tool posted on the communities site at: UCS WWPN Collector

I hope this helps you!

Joe

Cisco Employee

Re: Regarding WWN of HBA

Thanks Joe,

But I need to collect it from SNMP as my application can connect the device via CLI or snmp.

Any point of contact for SNMP related information

Thanks & Regards

Ruhul

Highlighted
Enthusiast

Re: Regarding WWN of HBA

Have you looked at: ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html

Also, all the right people are on this community forum who would know about SNMP, but you could also contact TAC or your account or channels team

Cisco Employee

Re: Regarding WWN of HBA

Thanks Joe,

Got help from UCS device bu that particular MIB file has some issue so they are check it.

Thanks & Regards

Ruhul

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards