cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
580
Views
0
Helpful
3
Replies
Highlighted
Beginner

Software failure in FI 6120

Hi,


I have got one UCS for lab practice but when I started the FI 6120 i found on console that it is in loader mode.


I also tried to reboot it twice or thrice but still it is in same state. When I tried with dir command I found there is nothing in its bootflash. The output is below for your reference.

loader> dir

bootflash:

  lost+found

loader> boot

Error 30: Invalid argument. Please do "help <cmd_name>" to get the usage

Also i found that kickstart image to boot UCS is not publically available to download. Please suggest if I can recover this FI to normal mode.

Thanks & Regards,

Shaheen Sidana

3 REPLIES 3
Highlighted

Hi,

the problem as same, my FI 6120 firmware is crash.

you need 3 file:

- ucs-6100-xx-kickstart.xxxx.bin

- ucs-6100-xx-system.xxx.bin

- ucs-manager-xxxx.bin

to get 3 file do you call TAC, because the file not publish.

for step:

1. do you put 3 file to tftp server.

2. set ip FI

3. boot kickstar from tftp.

3. copy 3 file to FI

for more details please go to https://supportforums.cisco.com/thread/2031470

sendi

Highlighted

Hi Sendi,

I called TAC but TAC engineer also published the same bundle for me which I downloaded from my CCO. TAC engineer also told that these three files are the part of same bundle but I am unable to extract the bundle file as it is in .bin format.

Please help if any how I can get these three files or what should I ask from TAC engineer.

Thanks & Regards,

Shaheen Sidana

Highlighted

Hi,

yes the file from TAC engginer. do you open case.

because the image FI is crash so the image need new install.

sendi

Content for Community-Ad