Unified Computing System Discussions

Hi there,my question is the following:given that you use the vic 1240 mLOM + 1280 mezz for "real" redundancy in a M3 blade + 2208 IOM, that creates 4 different port channels composed of 2 x 10GbE KR lanes each.Then when creating a vNIC in your servic...

Hello, We recently upgraded our Active and standby VSM pair form 5.1a to 2.1.1 in preparation to go fomr ESX 5.0 to ESX 5.1.We did the upgrade in two environments without issue. However out prod evvironment is causing issues. The upgrade went fine , ...

HOME#sho runBuilding configuration...Current configuration : 5657 bytes!! Last configuration change at 10:51:11 UTC Fri May 17 2013 by admin!version 15.0no service padservice timestamps debug datetime msecservice timestamps log datetime msecno servic...

With Ozden KarakokWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn how to design, plan, configure, implement, and troubleshoot Fibre Channel over Ethernet (FCoE) with Cisco expert Ozden Karakok. FCoE...

VMware site states the ESXi 5.1 Update 1 is supported with UCS but Cisco interop does not state that it is supported.  When will UCS interop state support for  ESXi 5.1 Update 1?

I have several B200 m3's booting esx 5.0 off local drives. It takes around 45 minutes to boot each. Most of the wait time is loading esxi modules. Such as the one below it sits at for about 10 minutes."hbr_filter loaded successfully""running usbarbit...

[update]issue has been resolved.switch# show flogi database--------------------------------------------------------------------------------INTERFACE        VSAN    FCID           PORT NAME               NODE NAME       -------------------------------...

Is it acceptable to mix Gold and Platinum Power Supply Units in one chassis? N20-PAC5-2500W   Gold PSU UCSB-PSU-2500ACPL  Platinum PSU

                   Hi, when I create pools in UCS Central they do not get updated in UCS Platform Emulator 2.1.1a, is this normal behaviour?.  I have tried IP Pools, ext-mgmt IP Pools, and MAC pools, either way they cannot be referenced in UCSPE whic...

I used to install Cisco Service Control Management Suite Collection Manager.Before that I have to install CentOS 5.5 and then install MySQL Database.For MySQL installation, I have to use some SQL command to complete the installationbut no configurati...

How to choose between wi fi and leased line internet connectivity for an enterprise network. Which solution is better? Making the whole campus wi fi or having wired internet connections?

I am looking for the offline bundle for the UCS drivers for the B200M3 / VIC1240 (UCSB-MLOM-40G-01) HBA and Ethernet adapters.  I downloaded the files off of the ISO, but none of them work in VMWare Update manager.  The ENIC and FNIC drivers for 5.0 ...

Hi ,I am using a Nexus 1000v a FI 6248 with a Nexus 5K in redundant architecture and I have a strange bevahior with VMs.I am using  port-profiles without any problems but in one case I have this issue I have 2 VMs assigned to the same port profileWhe...