Hello all,I need some assistance trying to get a tunnel to work. from the debug I see my IPSec proposals are not matching. this is a lab setup. ASA has only 2 interfaces configured with INSIDE/outside and there is only 1 tunnel. transform set options...
Hi all,
one of our clinethas upgraded their ISE to 2.4 and now facing with endpoint profiling..I cant seem to find any relevant information on Cisco Wireless IP Phone 8821 with ISE 2.4. Are these supported or will it be supported?
problem my clie...
Hi All,
just trying to find a way to fix this. my client seems to have some issues getting AC in parallel OVPN to work. AC meant for the internal users and OVPN for the contractors. however this doesn't seem to work. however this did work with Junipe...
Hi all,
since our client has upgrade the prime from 3.1 to 3.2 abig amount of network devices groups for Access Points have appeared, trying to delete them is not possible.
I assume this a DB hack and require TAC case, before I do that, just want...
Hi all,
just wondering if you would know any workaround other than reload.
Device: Cisco ISE Product Identifier (PID): SNS-3495-K9
version is 1.4 paths 10.Version Identifier (VID): A I have a syslog configuration which sends the Cisco ISE logs ...
HI Harold,Thanks for the reply, the config on both are the same including the proxy-id. Only thing that goes through my mind whether the auth and encryption keys are the sameASA has for an example esp-aes-256 and on junos has esp-aes-256-cbc
Sorry for the delay :) . I had to open a TAC case and the engineer provide a profile compress file. Client to import this and feedback. Once that done I will let you know.BTW, to get hold of the profile file, you will have to go here, ise.cisco.com/...
Thanks Richard,
let me ask the client about it, I guess he has done it correctly (from the info I have), looks correct to me. I will anyway ask him to review the below..will update this post if I have anything else.
once again thx
Lance