Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to figure out how to get around a double confirmation in an EEM script. In the eem script, if a specific event happens, I want it to do a show tech, and copy that up to a tftp server. The issue is it requires a double confirmation. What i...
Hi, Trying to build out an xconnect to follow a specific path (a longer path). I cannot get the tunnel to come up. I dont know what I missed. everything else looks ok. All interfaces are up and working, except the tunnel itself. I've included the MPL...
Is it possible to have an interface that can do GRE for a point to point IP network without having to know all the IP addressing?I want to be able to take whatever IP address comes in on a specific GIGE interface, and ship it across the GRE tunnel to...
I have moved to another vendor at my edge, and I have continued to use 0x8100 as my ethertype which seems to play nice except for when a customer has a native vlan1 setup.Vlan1 will get tagged into my SVLAN 301, but Cisco sees it as an incorrect BPDU...
My goal is to be able to see the performance of the customers vlan on the ME3400 through the network. I have been unable to get this to work in my lab. Does anyone have a sample of this that could help me out? I have opened a Case with cisco, but hav...
I got it working this morning. The IP RSVP statements with the hello signaling needed to be set, and I had to add the mpls traffic-eng tunnel statement to all routers in the path.Best testing it out, and it seems to work the way I need it to. Thanks ...
Interesting. I was wondering how you assigned RSVP to the config... it was not in the cisco document I was following, not even one mention of it. I assume its 'ip rsvp sig hello' for something basic to get it running? Ill need to google that... The s...
The ME3750 should work fine. It probably has a lot more features to it than you will probably need. A regular 3750 would work just as fine as well. I dont know if one is cheaper than the other. I do know you cannot stack a ME3750.The only thing I wou...
The ME3750 should work fine. It probably has a lot more features to it than you will probably need. A regular 3750 would work just as fine as well. I dont know if one is cheaper than the other. I do know you cannot stack a ME3750.The only thing I wou...
Have had the same problem. Make sure you both force the link to the speed/duplex you want.If you still have CRC issues on the line, usually its a cable issue. You can use the following command to test the cable.This does take the port down when you d...
