Guys, hope you can help...I've got a /23 LAN subnet which i need to route out to a carrier in different ways...192.168.0.0/23 is the LAN Subnet but when it comes in on the HSRP active i need to tell that active router that if the traffic is from the ...

Question; simple setup two routers back to back...Using an inbound ACL to determine packet count on one side, send 1000 icmp packets from the other side through the ACL and the ACL shows 3000 matches!No fragmentation....Anyone have any ideas?

Hi Guys,Strange one, i have configured a secondary subnet on a dot1q subinterface to allow for expansion. I created a secondary ip address on both interfaces, then configured another standby group for this subnet, something like this:R1:interface Gig...

Guys, i've read about the upgrade path from 4 to 8 but in my situation the hardware isn't coming with... We want to move from a stand alone version 4 platform to a virtualized version 8 platform. We were going to build the new platform as a new clust...