Hi
We have been shipped a couple of Cisco MSE 3365 appliance with the CMX 10.0 code however we are running Cisco Prime 3.0 and require MSE for WiPS. As Prime is only running 3.0 we cannot add the CMX to Prime to downgrade, therefore will need to do...
Hi I have a customer who is running version 7.4 on a Cisco 5508 wireless LAN controller together with 1602 APs deployed across a number of sites. They have all the APs set up in Flex mode and are currently locally switching all their wlan's onto a...
Hi AllI have trawled through the Cisco website and am struggle to find the answers to the below question, is any able to helpDo the Cisco 2960 and 2960S series switches support 802.1X-2004? Cisco 2960, is there a planned end of sale for these s...
Hi Does anyone know if the AP600 and 5508 supports a redundant controller option. Office extend is a crutial part of the business for my customer, and they are now looking to have a redundant controller in the DMZ is this possible.Thanks in advance
Hi Gents Thanks for your response.I am aware of the Cisco offering for a local AP and defining redundant controllers. However this is for the office extend solution where the AP600 is plug into an ADSL router and routes its CAPWAP traffic to a NATed ...
Hi first I presum you have a 2106 wlc (as the 2016 doesn't exist) which only has the capacity to support 6 APs, where you have 15 APs, MAPs do only class as half a licence once associated as to a RAP. The only thing to note here is that you can only ...
Please provide more information e.g:What software version is running on the WLC?What is providing DHCP, and what is the scope?Have you tried any debugs on the controller to see any LWAPP join requests, reaching the controller.Regards