Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have migrated from a CAT/OS 6513 to a new IOS 4928 / NX-OS 5010 environment.My final task is to move the RSTP root bridge funcion from the 6513 to a device(s) in the new environment.Do I move the RSTP root bridge function to the IOS 4928 or to the ...
Does the Secure ACS Express Appliance have the same TACACS+ Administration logging details as is logged by the Secure ACS SE 4.2? We have an ACS SE 4.2 and utilize the details of the Administration log for security purposes.I'm interested in the deta...
On my router MSFC2, I have static NAT entries. If I issue theip na inside source static 10.10.105.10 141.195.2.10before the device (10.10.105.10) is online, the router puts the MAC for the router in the arp table of the router, thus not allowing the ...
I have a 6513, SUP2, MSFC2, PFC2.Running hybrid CATOS/IOS. No problems.Other than supporting other cards in the future(SUP32, 10GB) is there a compelling reason to upgrade to native IOS? I have a small window of opportunity to do the upgrade in this ...
gmvburg23,I'm comfortable with the hybrid mode. The CATOS is handling 200+ servers and 35 uplinks from edge switches. The IOS is handling VLAN routing and one off site connection. Upon reading these various responses, I've convinced myself to not upg...
In theory, I could also take my standby SUP2 module out, place it into another 65xx chassis, upgrade to native (IOS), modify the configurations for interfaces, routing etc., then re-install it as the primary SUP2 in my 6513.It sounds like if I go to ...
