Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!I have multiple (3+) Cat3750 switches forming a stack, two ESX servers with multiple connections (2+) and am experimenting with VMotion (dynamically migrating virtual machines to another ESX host). Both ESX servers are connected to the same stack ...
From http://www.cisco.com/en/US/products/hw/switches/ps5532/products_qanda_item09186a00801eb822.shtml :--------------Q. What SFPs are supported on the Cisco Catalyst 3750 Metro Series?A. Cisco Catalyst 3750 Metro Series switches support 1000BASE-LX,...
It is not very clear to me how "ip local-proxy-arp" works. Anybody care to enlighten me?I thought that in the following configuration, host A (192.168.1.2) and host B (192.168.1.3) would be allowed to communicate, but in fact are not.Config is as fol...
Quote from documentation:A dedicated LAN interface and a dedicated switch/hub (or VLAN) is required to implement LAN-based failover. You cannot use a crossover Ethernet cable to connect the two PIX Firewalls.Any special reason you can not use crossov...
We encountered the same problem and after changing the VLAN for users (going out of WLC) to be different than VLAN for CAPWAP tunnel it seems that this issue is solved in our case (MAPs are connected now for nearly one week vs. previously there was a...
It turns out I had the same problem. It would be usefull if command "CSAgent -v" would also indicate the patch level and not only "ACSRemoteAgent version 4.1(1.23)"...Thanks,ROK
Great! (I was just thinking myself whether I should open the TAC case, but since there is already one opened I don't see any point in doubling their work.)Just one thing to mention, something does work as I'm able to see all windows groups defined in...
I'm experiencing the same problem as Leon (except that I have only a single ACS/Remote agent setup). Increasing the log level doesn't change anything, running csagent from console and specifying "-p -z" parameters also doesn't increase the logging le...
