Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I'm having an issue with 5508 model. emWeb process is stuck on 100%, you can't access WLC over GUI, and ssh is very slow...(5508_WLC) >show process cpu---------------------------------- System CPU Process ---------------------------------Curr...
Hi all,I'm currently looking for a way to limit bandwidth speed in our Meraki wifi network. We are having 50+ locations, same setup on all, two SSIDs, but the problem is that not all location have same internet link.My question are, can I globally se...
Hi all,Can somebody please help me understand what is being advertised from this router over ospf: !interface Loopback0description ConnectionToBranchip address 10.16.7.254 255.255.255.255!!router ospf 1redistribute static subnets route-map STATIC-PER...
Hi all,I ran into a problem with one of our sites. Corporate clients are using 802.1x for authentication. Problem is that clients can't connect on wifi. I first thought that problem is with DHCP and not getting IP address, but it might be authenticat...
Hi all,I'm facing strange problem with one of our sites, AP's are constantly disconnecting from WLC. They are associated for some time, than for some reason they disconnect and enter dtls loop process, they are stuck in loop for some random time (som...
Well not sure then what could be the problem... Can you post WLC error logs and also logs from AP? 8.3.143.0 is older version, did you consider upgrading to 8.5.171.0 / 8.5.182.0 ?
Hello,Based on your description and workaround, it seems you are having known problem with expired certificates. You can find more information on this link: https://www.cisco.com/c/en/us/support/docs/field-notices/639/fn63942.htmlBasically you need t...
Hi Aydin,There is an Out-of-Box option, but in my experience this is not working as it should. Idea is that when AP first joins WLC, it will be placed with out-of-box radio profile and their radios will be set to admin down. When you move AP to diffe...
