Hi and my best wishes to all forum users!I have a question regarding IOS voice gateway inbound dial-peer logic.Suppose, my gateway needs to receive calls to the same destination from different voip peers,some on h.323 and some on sip, and apply diffe...

Hello to all you knowledgeable people!Our customer has a mixed telephony system with CUCM 4.2, CUCM 6.1 and various h.323 gateways, both acting as transit points to PSTN and IP-PBXs connected as h.323 gateways (Avaya Definity & IP Office boxes). So h...

Hello! Our customer has a remote access server (cisco2811 running 12.4(20)T4) and RA is in following configurations:vpdn enable!vpdn-group 1! Default PPTP VPDN group accept-dialin protocol pptp virtual-template 2 local name PPTPinterface Virtual-Te...

Hello to all! We have a bit of a problemOur customer has a geographically spread voip. Central site and spokes. Some spokes have local phone ports only and are connected via h.323 peers, some have local pbx connected via sip and gateways there only d...

Hi! The problem is the following: the customer had a TDM PBX connected to PSTN through E1 PRI. After implementing IP-telephony we installed Cisco3825 with 2 PRIs on vwics (1st facing PSTN, 2nd facing local PBX) to host applications and allow PSTN acc...